€ 0,15
Compare
€ 0,20
Compare
€ 0,25
Compare
€ 1,95
Compare
€ 7,95
Compare
€ 6,95
Compare
€ 3,95
Compare
€ 1,95
CompareYou can compare a maximum of 3 products
Threaded rod M10x1 available in lengths of 1 cm, 1.5 cm, 2 cm, 2.5 cm, 3 cm, 3.5 cm, 4 cm, 5 cm, 7 cm and 10 cm. You can screw these threaded tubes into the top of the lamp holder. Doing so you can create a table lamp. More information
Nut for Threaded Tube M10x1 - galvanized (wrench size 14). More information
When you make a lamp, the cable gland or wire end may not be long enough. You can use a so-called 'sleeve' for this. A sleeve is nothing more than a connector with which you can connect two wire ends, for example. More information
You can use this metal pendant tube / extension tube to adjust a lamp. Because the pendulum tube is hollow on the inside, you can run a cord through it. This way you can hide the cord in a stylish way. More information
You can use this metal pendant tube / extension tube to adjust a lamp. Because the pendulum tube is hollow on the inside, you can run a cord through it. This way you can hide the cord in a stylish way. More information
Do you want to mount a lamp holder on a shelf or wall? This nipple plate offers the solution! A threaded rod is attached to the nipple plate on which you can directly mount a lamp holder. More information
When you make a lamp, the cable gland or wire end may not be long enough. You can use a so-called 'sleeve' for this. A sleeve is nothing more than a connector with which you can connect two wire ends, for example. More information